Landscape lighting can add a high-end look to your home, and makes it safer, too. There are many types of lights and fixtures to choose from, like path lights, spotlights which highlight specific features and floodlights which illuminate a wide area. There are two ways to power your outdoor lighting. Solar power LED light is easy to install and has no wiring. Low-voltage lighting simply plug into any outdoor GCFI outlet.
We are using lighting kits that come with all the necessary components. But if you are building your own decorative outdoor lighting or adding to an existing kit, remember to choose a finish that matches your home and the other light. At night, use the flashlight with the ability to switch between spot and flood mode to see how different light styles look in different areas. You can install path lighting and spotlights in the front yard, which highlight the landscaping and the front of the house.
Once you have your plan, you can lay out your lights. Start at the outlet and place the power pack nearby, but don’t plug it in until the lights are all assembled. The power pack can be attached to a post or to the house itself. Lay out the main cable, leaving 10 feet before attaching any lights. Then simply screw in the cable connectors wherever you want to add a light.
To hide the power cable, use a small trowel to dig a trench, and add a perpendicular trench at each light position for the extra cabling. Push the cables down into the trench, and gently push the light stakes partially into the ground. Attach the cabling to the power pack, and then it’s the time to test the lights by plugging that power pack in. if you like the way it looks, you can finish it up by pushing the stakes all the way in and closing the cable trenches. The last step is to set your timer to turn the lights on at dusk and off at dawn, and you’re done.
By following these easy steps, your yard’s pleasant glow is sure to catch the eye of everyone in the neighborhood.